|
Product Details:
|
| Skiving Allowance: | 2mm | S/P Main Motor: | SIEMENS |
|---|---|---|---|
| Machining Time/ Tube: | 50 Min | Cooling Device Liquid Level Control: | Alarm When Cutting Oil Is Low |
| Feeding Speed: | 0.9 Mm/r | W/H Workpiece Installation: | Cone Positioning, Clamping |
| W/H Fixture: | Manual Replacement Of Cone Disk | Function Of Internal Structure: | Eliminating Vibration When Boring Bar Rotation |
| Highlight: | ISO9001 Skiving And Roller Burnishing Machine,Skiving And Roller Burnishing Machine 0.9 mm/r |
||
Skiving Roller Burnishing Machine with Southern Centrifugal Pump
Ⅰ. Description of Fuel Feeder:
Consisting of a positioning cone, a tool guide sleeve, a boring bar support sleeve, and a clamping device, there is a cutting fluid inlet on the oil feeder. When clamping the workpiece, position and tighten it from the tail end; During machining, the cutting fluid enters the cylinder body from the oil feeder and carries out chip removal.
Ⅱ. Parameters
| SRB Specification Model |
SRBE4000/200SNC1W |
|
Inner Diameter of Raw Tube |
200mm |
| Length of the Workpiece |
5000mm |
| SRB Machine Machining Method | Workpiece Fixation and Tooling Rotation |
Ⅲ. Picture
Contact Person: Ms. Patricia
Tel: +86 19802501087
